Comparison of the types of DVC remote control and data flow communication interfaces
Release time: 23-03-08 09:20 Number of views: twenty-four
Comparison of the types of DVC remote control and data flow communication interfaces
Bottom It is an overview and comparison of different remote control and data flow transmission about software authorization, typical performance and other information relatively
Interface Options | Whether included in OXYGEN software | Interface type | Typical applications | Typical performance |
SCPI | yes | Standard Ethernet | Grab the real value, load the settings, and software control | 50S/s @ 50 channels; most Large 10kS/s @ 10 channel |
XCP Slave | Authorization required | Standard Ethernet | Test data transmission, base Basic storage control System, currently only compatible CANape、INCA Concurrent Content is being added | 10kS/s @ 8 channels |
EtherCAT | Authorization required | TRION EtherCAT | EtherCAT test bench Environment, via EterCAT bus transmission Measurement of PDO mechanism data | 400 S/s @ 100 channel |
Data Stream | Authorization required | Standard Ethernet | Real time processing of raw data Full speed transmission to the third party Application; Use TCP/ IP protocol for data Transmission; Multiple can be added Port. | 100kS/s @ 350 channels Or 2MS/s @ 12 channels |
Ethernet Sender | Plug in required | Standard Ethernet | Send the time stamp of the treatment Actual synchronization data | 1-100 Hz |
