High speed portable multi-channel data acquisition DEWE3-A4
DEWE3-A4 DAQ data acquisition system is the perfect solution for portable integrated data acquisition. Four TRION (3) slots can accommodate up to 32 analog measurement inputs, 1tb SSD storage, and intuitive OXTYGEN measurement software make it widely applicable and flexible. Whether it is field measurement, on the vehicle, or on the test bench - this compact and robust measurement system can be applied.
Product features:
Up to 32 analog inputs (via replaceable TRION3 Or TRION module)
Digital input, counter and CAN integration
Synchronous sampling rate up to 10ms/s
Comprehensive synchronization options
Isolate DC power supply and optional battery panel power supply
Optional internal UPS buffer battery for 5 minutes
13.3 "wide screen multi touch full HD display
1tb solid state disk, capacity 400mb/s
More flexible data acquisition framework
The upgrading of data acquisition framework has brought huge space and cost savings. The functions provided by the chassis frame previously required up to three independent TRION modules: TRION BASE, TRION-CAN and TRION TIMING.
Now, the interfaces of counter, CAN, GPS, PTP, IRIG, PPS and digital input and output are directly built into the chassis. This allows these TRION slots to now freely use other analog or digital TRION (3) modules.
Using Multi Touch
DEWE3-A4 is equipped with a bright 13.3 "widescreen multi touch full HD display to control the system. You can touch the screen with your finger, just like on a smartphone. For example, drag the sidebar from the right side of the screen to open channel settings. In addition, the DAQ data acquisition system can be controlled through a multi touch touchpad with two designated keys. Pressing the touch pad will also trigger the key.
OXYGEN Measurement software
DEWE3-A4 can make full use of the potential of our easy to use OXYGEN measurement software, which supports a large number of software functions and expands with each new version.
One of the core features of OXYGEN is powerful data recording. All the acquired data can be stored in a data file by simply clicking the record button. With the right hardware, you can achieve data rates of up to 1GB/s without worrying about losing anything.
Check data during recording
The file splitting option generates a new file within a certain period of time or when an event occurs
Channel sampling rate selection
Open on any PC with installed OXYGEN software (free)
User replaceable TRION3 and TRION modules
DEWE3-A4 supports all high-speed TRION3 and TRION modules. DEWETRON Provide TRION (3) module for almost all sensors and inputs, such as current, voltage, power, vibration (IEPE), bridge (strain gauge), potentiometer, RTD, CAN, counter input, thermocouple, etc. Use an external time source for synchronization, such as GPS, PTP or IRIG.
CAN and RS485 module
External multi-channel CPAD and EPAD modules integrate analog signal conditioning and A/D converters in a very solid box - CAN or RS485 interface box
Connect external, multi-channel modules, and combine analog signal conditioning and A/D converters in an extremely sturdy box that can be daisy chained.
CPAD3 Series: High voltage isolated high-speed CAN, 100Hz per channel
CPAD2 series: CAN interface, 12Hz per channel
EPAD2 series: RS-485 interface, 12Hzz per channel
The optional battery pack makes DEWE3-A4 a completely independent data acquisition system. The battery life of three rechargeable batteries can reach two hours. Due to the "hot swap technology", the battery can be replaced in the continuous measurement process, so that no external power supply is required for continuous mobile operation.
