Independent signal conditioning

The isolated general signal amplifier module DAQP-STG cooperates with the signal conditioning host DEWE-30-x series to build a pure signal conditioning and amplification system.

DAQP-STG Isolated Universal Signal Amplifier Module

Single channel isolated signal amplifier module DAQP-STG bandwidth can reach 300KHz, 1.8kVrms electrical isolation design, RS485 communication interface supports quick and simple setting, and outputs standard ± 5V conditioning signal , general analog signal input amplifier

• Channel: single channel isolation

• Bandwidth: 300 kHz

• Sensor power supply: 0-12 V, 0-20 mA

• Voltage range: ± 10 V

• Voltage input: ± 500 μ V to ± 10 V (MSI-BR-V-200 is used for up to ± 200 V)

• Strain gauge bridge: ± 0.1 to ± 1000 mV/V (@ 5 VDC excitation)

• Piezoresistive bridge: ± 0.5 to ± 10000 mV/mA (@ 1 mA excitation)

• RTD: thermal resistance sensor (Pt100 to Pt2000), 9-gear resistance adjustable (8 to 4000 Ω)

• Resistance: 25 m Ω to 100 k Ω

• IEPE: constant current supply sensor (accelerometer, microphone), 12 gear ± 100 mV to 10 V, (with MSI-BR-ACC)

• Thermocouple: TC type full range (with MSI-BR-TH-x)

• Charge: Up to 50000 pC (with MSI2-CH-x)

• Others: TEDS electronic sensor

DEWE-30 modular signal conditioning cabinet

Dewe-30 series signal conditioning chassis is applicable to all DEWETRON signal conditioning modules. When installing DAQP dynamic isolation amplifier, optional ± 5V or ± 10V conditioning signal output is provided on BNC socket or multi pin connector. The multi pin connector can be connected to any A/D board connector, and the analog signal can be reproduced 1:1 with high-quality connecting cables.

Product highlights

Independent signal conditioning

Front end expansion of existing recorders and other equipment

Channel expansion of DEWETRON equipment

Optional ± 5V or ± 10V output signal on multi pin connector or BNC socket

Desktop and 19 inch rack mounted version

Conditioning output ± 5V or ± 10V signal

DEWE-30 chassis connected with quasi-static PAD amplifier

For the quasi-static isolation amplifier, the data is connected to the DEWE-30 chassis through RS485. Of course, DAQP and PAD module 。

List of discontinued DAQP modules

The following discontinued models are not recommended to be equipped with new test systems. We have better signal conditioning modules, TRION series and DEWE3 series hosts