one DEWE3-PA8 Mainframe of power analyzer
2 TRION/TRION3 series power module
3 Insert/pull out handle
4 Module Guidance Label
5 Mounting screws
Installation steps of power analyzer DEWE3-PA8 module:
Step 1. Appropriate ESD precautions must be taken to avoid any unit damage.
Step 2: Disconnect and unplug all connected cables, including those from DEWE3-PA8 and TRION ™/ TRION3 ™ Series module.
Step 3: Determine a supported TRION ™/ TRION3 ™ Peripheral slot. Some modules require a TRION ™ STAR slot of the.
Step 4: Remove the unused TRION ™ Filter panel for peripheral devices or STAR slots.
Step 5: Set TRION ™/ TRION3 ™ The module edge of the module is placed at the top and bottom of the chassis in the module guide.
Step 6: Set TRION ™/ TRION3 ™ Insert the module into the rear of the chassis until resistance appears.
Step 7: Pull up the upper insert/pull out handle to lock the device
Step 8: Use the mounting screws to install the TRION ™/ TRION3 ™ The front panel is secured to the chassis.
Warning: ! The unused TRION slot cannot remain uncovered! Make sure to reinstall the unused TRION ™ Slot to ensure proper cooling of installed modules. If the module overheats due to lack of filter panel, the warranty is invalid!
