Dewei Chuang DEWETRON Universal multi-function data acquisition board module TRION-2402-MULTI

Product features:

General Analog Input Module

Sampling: 24 bits, 200 kS/s per channel

Input type: voltage, bridge, resistance, RTD, IEPE ®

CAN: high-speed CAN2.0 port

Product parameters:

TRION-2402-MULTI technical parameters
Input channel	TRION-2402-MULTI-4-D	4 channels D-SUB connector (CH1 can be used as CAN port)
	TRION-2402-MULTI-8-LOB	8 channels OB LEMO connector (CH1 can be used as CAN port)
ADC -Resolution -Sampling rate	24 bit 1kS/s to 200 kS/s per channel
input range -Voltage    -  IEPE@ -Electric bridge -Resistance	±2  mVto±100  Vfreely  programmable ±100 mV  to±10Vfreely programmable ±1 to 1000 mV/V 10,30,100,300   Ω,1,3,10,30  kQ
accuracy -Gain bias -Zero offset -Linearity	±0.02%of reading±0.02% of range±20 μ V Typical  10  ppm/℃max.20  ppm/℃ Typical0.3 μ V/°C+ 10 ppm of range/°℃,max2 μ V/°℃+20ppmofrange/℃ Typical±0.01%
Input impedance	0 to 10V range	100   MQ
	>10 to 100 V range	2   MQ
bias current	<5  nA
Input mode	Single-ended or differential (programmable)
Input coupling	DC/AC(high pass filter 0.16 Hz)
Voltage to ground EN 61010-2-30	33 Vws,46.7 VEAn 70Voc
Isolation voltage (between channels and between channels to ground)	350  Vo
Common mode voltage to ground	0 to 10V range	±10V
	>10 to 100 V range	±100 V

Overvoltage protection	0 to 10V range	±50Voccontinuous,100 Voc(1min)
	>10 to 100 V range	±200 Vc
Excitation voltage range -Resolution -1-year accuracy -Offset -Current limit -Protection -Load and linearity error	0to 24Vcfreely programmable; separatelyfor each channel 1  mV ±0.03 %±1.5 mV ±10 ppm/°℃±50 μ V/℃ 0.1 to 5 V:100 mA >5Vto 24V:limited to 0.5 W Continuous short +0.002 % with sense line connected
Excitation current -Resolution -1-year accuracy -Offset -Compensation voltage -Output impedance	0.1 to 60 mADC(programmable, 16-bit DAC) one μ A 0.1 to 5 mA:0.05%±2 μ A >5 to 60 mA:2%±5 μ A 15  ppm/℃ 0.1 to 20 mA:24V >20 mA:  10V >10  MQ
Compatible sensors	4-or 6-wire full bridge ◆3-or5-wire % bridge with internal    pletion (software programmable)		Potentiometer com- Resistance     Resistance temperature detection:
	◆3-or4-wire 1% bridge with internal   resistor for 120 Ωand 350 Ω(software			Pt100,Pt200,Pt300,Pt500,Pt1000, Pt2000(2-, 3-,4-wire)
	programmable) 4-wire full bridge with constant current   excitation(piezoresistive bridge sensors)
Bridge resistance	80Ωto10kΩ@≤5Vcexcitation
shunt calibration	Two internal shunt resistors 50 kQ and 100 kΩ
Accuracy of shunt and compensation resistor	0.05%±15   ppm/K
Automatic bridge balancing	±400 % of range
Low pass filtering (- 3 dB, digital)    - Characteristic    - Filter order    - Filter setting AUTO	1 Hz to 40 % of sample rate freely programmable or OFF Bessel or Butterworth 2nd,4th, 6th,8th 30 % of sample rate with 8th order Bessel
Analog anti aliasing filter Sample rate>10 kS/s	2nd order Bessel, 250 kHz(-3 dB),150kHz(-1 dB)