Due to its small size and weight, NEX [DAQ] is an ideal travel companion for engineers to troubleshoot. When connected to USB-C or Ethernet interface of any PC, NEX [DAQ] becomes a powerful measurement system for analog, digital, counter and CAN bus data acquisition.
Plug and Play : Simple, fast setup software OXYGEN Gapless data recording; Multiple power supply options :USB-C , onboard Power Supply 12v or 24v, PoE , can be used safely under any circumstances ； Suitable for various environmental conditions, waterproof, fanless, high temperature resistant. Get high-quality measurement data with high cost performance ratio.
Key characteristics
USB-C Or Ethernet connection
twenty-four position @ 200ks /s or 1ms /s Per channel
Power supply mode :USB-C, PoE, Lemo
Interface
eight Analog inputs
2 CAN-FD and XR modular
four Advanced counter + 8 DI + 4 DO
waterproof
NEX[DAQ] Not only reliable, but also absolutely robust. Even water can't hurt it. Therefore, it has IP67 Protection grade, which means it is dustproof and waterproof for a long time.
No fan
because NEX[DAQ] Without fan, it is noiseless, so it is suitable for acoustic measurement. IEPE Microphone through MSI Sensor adapter support.
Temperature tolerance
NEX[DAQ] The operating temperature range of is -20 ° C to +70 ° C , available for Indoor, near hot parts and outdoor testing.
Analog input signal
All common sensors are supported. Voltage acquisition up to ± 100 V , full bridge and half bridge, digital IO , counter, encoder and CAN-FD Native support. In addition, additional signals such as voltage up to ± 1000 V , quarter bridge, LVDT , current, vibration, IEPE , charging, thermocouple, potentiometer and RTD Through our small MSI Sensor adapter.
Higher channel count - expand your analog input
Because of its small size and weight, NEX[DAQ] Ideal travel companion , engineers can take it directly to the destination 。 It can easily fit into any pocket and can be carried with a laptop. This makes it ideal for troubleshooting, maintenance or commissioning equipment such as machines or test benches. NEX[DAQ] The data acquisition system is distributed. If eight Insufficient channels, multiple channels NEX[DAQ] The unit can be connected to a multi-channel system at any time. One cable is enough to pass through Ethernet PTP/IEEE1588 Data transmission and synchronization.
The data acquisition system meets daily needs
NEX[DAQ] Not only can it be easily placed on one hand, but also can be used in any situation. This makes it your ideal travel partner. It is a must for every test and measurement engineer who does not want to make any compromise.
NEX[DAQ] Perfect for your daily measurement needs :
Mobile and autonomous testing in the vehicle, real-time integration on the test bench, portable service application or permanent installation in the monitoring application
Worry free power supply
NEX[DAQ] Multiple power supply options are available for easy use in any situation :
adopt USB-C PD Connector :
Any simple power adapter with USB-C Connector
For use of standard smart phone power bank
adopt Lemo Socket for wide range DC input, which can be connected to the power grid of vehicle board (12v, 24v)
Power through Ethernet, using PoE Injectors or PoE Switch
CAN-FD interface for on-board measurement
have two Per high speed CAN Bus interface, NEX[DAQ] It is also intended for on-board measurement. Both interfaces provide CAN- fd and CAN 2.0B Output.
CAN- FD Provision ratio CAN With higher transmission rate and more user data per message, you can measure more reliably and faster.
In addition, you can connect two CPAD/ XR Module for low speed channel expansion, e.g. for many temperature channels or RTD Enter.
OXYGEN software for simple and fast setup
Just plug and play to start gapless data recording. Our measurement software OXYGEN Ensures you can set up quickly and easily NEX[DAQ] 。 Customize the software according to your measurement tasks by defining different screens and views.
OXYGEN Provides many standard functions, such as analysis (FFT) , visualization and post-processing
Triggers and events, math and calculations, reporting ( for example PDF) And export. Advanced functions, such as sequence or power analysis, efficiency chart, scanning sine analysis, etc.
One NEX [DAQ] for different measurement tasks
Vibration measurement
Material strength test with strain gauge
Maintenance, service and troubleshooting
temperature measurement
Prototype testing
Distributed data collection
Noise test
Sound level measurement
Vehicle power consumption road test
