DVC power analyzer Of Power module TRION3-1810M-POWER -4 is an ultra compact 4-phase power data acquisition module with flexible current or voltage input, which can be used for any Devotron DEWE3 host, including DEWE3-PA8 Power analyzer

Voltage input (installation):  

Fast sampling, high bandwidth and small capacitance to ground are just some outstanding characteristics of high voltage input. High input impedance allows high continuous voltage levels and very low temperature drift. Although small in size, the safety category is at a very high level (CAT III 1000V).  

Current input (replaceable):  

TRION3 -The 1810M-POWER-4 has four highly flexible voltage or current inputs. Four slots can be filled with four different DC measurement modules or three different SUBD-9 modules to connect almost any type of current sensor 。 Alternatively, the connector can also be used to measure any auxiliary ± 10 V signal (e.g. wind speed or water flow).

Voltage input (replaceable module TRION-SUB-xV)

If more than four voltage inputs are required, these four slots can also be filled with our interchangeable voltage input SUB sub module. Select LV isolation 5V or isolation 600V CATII rated stator module

Power analyzer DEWE3-PA8 wiring mode

Three phase three wire current direct input without neutral line (3P3W)

Three phase three wire current sensor input without neutral wire (3P3W)

Three phase three wire voltage sensor input without neutral wire (3P3W)

Three phase four wire with center line (3P4W)

Single phase system (1P2W)

Three phase+one phase system (3P3W+1P2W)