Shanghai Beiying Electronics
contact us
Shanghai Beiying Electronics
Email: [email protected]
Telephone: fifteen billion twenty-one million five hundred and sixty-two thousand five hundred and thirty-nine
Address: Room 118, Block B, No. 348 Huajiang Road, Shanghai
Current location: Home page of Dewei Chuang > news information > Introduction to the interface of DEWE2-P7 Operation Manual

news information

Introduction to the interface of DEWE2-P7 Operation Manual
Release time: 22-12-02 20:26 Number of views: twenty-six

DVC power analyzer Introduction to the functions and layout of the front panel of DEWE2-P7:


image


1、 EPAD2 Expansion interface (LEMO port, used to connect EPAD2 module)

image

2. USB 3.0 interface (USB3.0 interface connector meets the standard USB pin assignment, universal serial bus)

3. USB 2.0 interface (USB2.0 interface connector meets the standard USB pin assignment, universal serial bus)

4、  Power analyzer switch (the switch on the front of the system is used to turn on the system. Only when the main power switch is turned on)

5. Power analyzer host grounding (For some measurement methods, it is necessary to provide an additional grounding connection for the system)

6、 TRION ™ Module slot (7 slots for TRION ™ Series module. DEWE2-PA7 Support all Dewei Chuang modules)

7 、 Current clamp Power supply interface (provide ± 15 V/+9 V power supply)

8. 9 "inch multi-point touch screen (DEWE2-PA7 Equipped with a bright 9-inch 1280 x 800 Multi touch screen to control the instrument, gestures such as pinch and zoom are fully realized in the operating system)


Introduction to the functions and layout of the rear panel of DEWE2-P7 power analyzer:


image



9. Power analyzer host Power supply (Input range: 100-240VAC, including power line)

10 、 Main power switch (the front panel switch can work only when it is switched to the "I" position)

11. PCIe interface (DEWE2-PA7 is configured with PCI express x1 interface by default ™- SYNC-BUS (19) It can easily expand high-speed channels with the f series chassis.)

Note: The PCIe 1X interface connector used to connect the DEWE2-F series is no longer the structure of the new model DEWE2-PA7 in the scope of supply. Please note that the TRION-SYNC-BUS interface is not affected by this change. Add extension to DEWE2-PA7 through TRION-SYNC-BUS interface.

12、 PS/2 interface connector (connect the external PS/2 mouse to the system. The connector meets the standard pin assignment requirements)

13、 PS/2 interface connector (connect the keyboard to the system. The connector meets the standard pin assignment requirements)

14 、 Display port connection terminal (in addition to DVI connector interface, DEWE2-PA7 also supports two display port connectors with standard pin assignment)  

15 、 DVI interface (DVI connector conforms to standard DVI pin assignment)  

16、 RS-232 interface (RS-232 male interface is configured as standard RS-232 interface COM1, which can be used for mouse or other peripherals)

image

17、  LAN GBit interface (DEWE2-PA7 supports 10/100/1000M LAN and standard RJ45 connection)

18 、 Audio interface (input and output)

19、 TRION ™- BUS synchronization (TRION ™- SYNC-BUS allows easy high-speed channel expansion and supports TRIONet Front end data acquisition or distributed high channel counting data acquisition system installed with OXY-OPT-NET software function)


Please contact Shanghai Beiying Electronics for a complete version of the DEWE2-P7 Operation Manual of DEWE2 Power Analyzer.