Add TRIONET device in OXYGEN software

Except with O XYGE N Used together TRION In addition to the steps described in hardware, if TRION Hardware vs TRIONet In combination The following steps must be performed.

• Turn the access to network information under the network interface to automatic, ( reference resources Using the TRION board in OXYGEN software ). this Mode can automatically find TRIONET devices

Fig. 4.17: Network interface settings

• IP The address is shown in the figure below ( chart four point one eight )

Fig. 4.18: TRIONET IP address

• Entering the channel interface will display the TRION board loaded on TRIONET

be careful : 

except TRION Outside the hardware driver, it is used in the measurement system TRIONet No additional drivers are required. yes shut TRIONet And troubleshooting, see TRIONet Technical reference manual.